Manufacturer: Bandera (SICA)
Country of origin: Italy
Year of manufacture: 1990
Description: Automatic cutting and haul-off units for PE smooth pipes, pipe range 280 to 1000 mm. The complete set of pipe clamps for cutting unit.
Location: Warehouse in Italy. All goods can be delivered in any country.

Manufacturer: Sica
Country of origin: Italy
Model: TRS/C10-125
Year of manufacture: 2008
Description: SICA automatic cutting unit with adjustable pipe clamping system, disegned to cut PE and PP smooth pipe OD from 10 up to 125 mm.
The equipment in good condition.
Location: Warehouse in Italy. All goods can be delivered in any country.

Manufacturer: Sica
Country of origin: Italy
Model: P160/4
Year of manufacture: 2016
Description: four-track haul-off device from Sica. Pipe range from 20 up to 160 mm. Good condition.
Location: Warehouse in Italy. All goods can be delivered in any country.

Manufacturer: Dolci Extrusion
Country of origin: Italy
Year of manufacture: 2012
Description: Dolci 5-layer cast line for the production of stretch film, useful width 2000 mm (4X500mm).
4 extruders, screw sizes 75 mm, 75 mm, 160 mm, 65 mm.
Configuration :
A= 10%-12%
B and B1 = 50%-65%
C = 15%-18%
D = 10%-12%
Output - up to 1.200 kg\h
Mechanical speed - 650mt/min
Feedblock Cloeren
Cloeren flat die
Thickness range: 12-30 my
NDC Thickness control
Edge trim and removal
Automatic winder
Automatic palletizer
The line installed in Feb. 2012.
Location: The line is currently in operation in Europe

Manufacturer: Battenfeld
Country of origin: Germany
Model: BEX1-75-30B
Year of manufacture: 2006
Description: On our warehouse is available parts for single screw extruder model BEX1-75-30B:
Screw, cylinder, feed bush in good shape and condition
Drive motor
Operator panel and other electric parts
Location: Warehouse in Italy. All goods can be delivered in any country.

Manufacturer: Sica
Country of origin: Italy
Model: TRK/U/SY/32-250
Year of manufacture: 2008
Description: SICA automatic cutting unit with adjustable pipe clamping system, disegned to cut PE and PP smooth pipe OD from 32 up to 250 mm.
The equipment in good condition.
Location: Warehouse in Italy. All goods can be delivered in any country.

Manufacturer: Olmas
Country of origin: Italy
Model: C66AP
Year of manufacture: 2012
Description: Corrugator Olmas with watter cooling system, for single (drainage) and double wall corrugated pipe. Pipe range 50-250 mm.
Machine configuration:
Moulds set: OD 50 mm (double wall), OD 92 mm (single wall), OD 110 mm (double wall), OD 126 mm (single wall)
Cooling tank
Perforator
Cutting unit
We can implement the line with moulds and tools that you may need.
Location: Warehouse in Italy. All goods can be delivered in any country.

Manufacturer: IPM
Country of origin: ITALY
Model: TPK400
Year of manufacture: 2001
Description: IPM automatic cutting unit, disegned to cut PE smooth pipe OD from 63 up to 400 mm. The machine is provided with adjustable tools
Location: Warehouse in Italy. All goods can be delivered in any country.

Manufacturer: SICA
Country of origin: ITALY
Model: P400/6
Year of manufacture: 2007
Description: SICA 6 belts haul-off for pipes size from 50 up to 400 mm.
The equipment in good condition.
Location: Warehouse in Italy. All goods can be delivered in any country.

Manufacturer: Itib-MT
Country of origin: Italy
Description: Corrugated line for production of single wall electric corrugated pipe .
Line configuration: Moretto granule loader 2004, Extruder MT model MTF 70/25 (Italy) 2008, extrusion die head Itib, corrugator Itib model F32/52-72 (52 pars), there is a chance to extend max number of moulds up to 72 pars.
Sets of moulds for pipe sizes: 16, 20, 25, 32. The line in good condition.
There is chance to complete the line with wire puller.
Location: Warehouse in Italy. All goods can be delivered in any country.

Manufacturer: Itib
Country of origin: Italy
Model: F315/33
Year of manufacture: 2005
Description: extrusion line for double wall corrugated pipe: canalization, cables protection or drainage pipe. Line configuration: main extruder BAmut EA75 RAASE HP, extruder for inner layer Amut SUALCE HP, Itib extrusion die heads,
Itib corrugator F315/33 (33 prairs) with water cooling, moulds for sizes: 90-110, 160, 200, 250 и 315. Tools for pipe sizes 160-200-250-315.
Itib cooling tank and haul-off, model W315, year of manufacture 2018.
Ipm cutting unit, model TPC/K400, haul-off device and IPM cutting unit (without clamps).
The line can be completed with the new mould that you need
Location: The line is in function, located in Italy.

Manufacturer: APE
Country of origin: Russia
Year of manufacture: Brand new
Description: Remachinery- is a division of "APE" Group, on own production site can produce moulds for corrugators of any type
(pressure or vacuum) on modern CNC machines. Pipe range diameters from 6 to 250 mm. All goods can be delivered in any country..
Location: Tver, Russia.

Manufacturer: APE
Country of origin: Russia
Year of manufacture: Brand new
Description: Remachinery- is a division of "APE" Group, on own production site can produce die head for corrugators of any type for single wall pipe pipe size OD 16-63 mm on modern CNC machines. All goods can be delivered in any country.
Location: Tver, Russia.

Manufacturer: APE
Country of origin: Russia
Year of manufacture: Brand new
Description: Remachinery- is a division of "APE" Group, on own production site can produce wire feeding for corrugators of any type. All goods can be delivered in any country.
Location: Tver, Russia.

Manufacturer: KraussMaffei
Country of origin: Germany
Model: VT63/1/6
Year of manufacture: 2008
Description: KraussMaffei vacuum tank, tank length ??? m. Max pipe outside diameter 63 mm. Good condition.
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: Battenfeld
Country of origin: Germany
Model: R125/4E
Year of manufacture: 2003
Description: four-track haul-off device from Battenfeld. Max pipe outside diameter 125 mm. Good condition.
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: Battenfeld
Country of origin: Germany
Model: V2-125 VA
Year of manufacture: 2003
Description: Battenfeld vacuum tank, tank length 9 m. Max pipe outside diameter 125 mm. Good condition.
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: Battenfeld
Country of origin: Germany
Model: CB 250 VA
Year of manufacture: 2006
Description: Battenfeld cooling tank, tank length 6 m. Max pipe outside diameter 250 mm. Good condition.
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: Battenfeld
Country of origin: Germany
Model: CB 125 VA
Year of manufacture: 2006
Description: Battenfeld cooling tank, tank length 6 m. Max pipe outside diameter 125 mm. Good condition.
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: Gnata
Country of origin: Italy
Model: MAC140
Year of manufacture: 2000
Description: Marking machine suitable for PE smooth pipes, diameter range from 12 to 140 mm. The printer was almost entirely reconditioned by the manufacturer. On the pictures you can see the condition before and after the recondition.
Machine complete of: Ventury system for waste tape, Acoustic alarm end of tape, Optical sensor for tape breakage, Double tape unwinder, Date 6-digit number, Meter counter, Automatic "0" meter setting, Rollers supporting for pipes sizes 20, 25, 32 mm.
Addionaly Remachinery can produce brand new stamps with trademarks, international alphabets and marking tapes in very short time.
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: Krauss Maffei
Country of origin: Germany
Description: Extrusion die head for single-layer PE or PP pipe.
Head totally assembled with tool for size OD 110 mm, complete with heaters.
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: Battenfeld
Country of origin: Germany
Model: PO250VS14
Year of manufacture: 2006
Description: Extrusion die head for single-layer PE or PP pipe, max OD is 250 mm.
The die head is in good condition, totally assembled with all temperature and pressure sensors, all heaters and thermocoupleswith. Supplied with the tool for size OD 110 mm.
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: Itib
Country of origin: Italy
Model: F630 SH9
Year of manufacture: 2008
Line configuration: main extruder Cincinnati Talos 75-30G + second extruder Cincinnati Talos 60-30G, Itib corrugator F630 SH9, moulds for pipe size 125 and single profile 160.
The line is supplied with all tools and spindle for pipe sizes 200-250-315-400-500-630.
IPM cutting unit.
Location: The line is in function, located in Europe.

Country of origin: Russia
Description: Coextruder to apply stripes on a smooth pipe.
In stock Tver is available 3 pieces made in Russia.
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: HERBERT STORK MASCHINENBAU
Country of origin: Germany
Model: E20.OKSY1-25D
Year of manufacture: 2006
Description: Coextruder to apply stripes on a smooth pipe made by HERBERT STORK. Screw diameter 20 мм, L/D 25. Good condition.
Location: Available 2 units in stock in Tver. All goods can be delivered in any country.

Manufacturer: Itib
Country of origin: Italy
Model: F630 SH9
Year of manufacture: 2008
Line configuration: main extruder Cincinnati Talos 75-30G + second extruder Cincinnati Talos 60-30G, Itib corrugator F630 SH9, moulds for pipe size 125 and single profile 160.
The line is supplied with all tools and spindle for pipe sizes 200-250-315-400-500-630.
IPM cutting unit.
Location: The line is in function, located in Italy.

Manufacturer: Lunardon
Country of origin: Italy
Model: ML6 3200
Year of manufacture: 2000
Description: Single reel semi-automatic coiler suitable to coil PE smooth pipes, size range from 40 up to 125 mm. The coiler is in good and working condition, you make inspection in our warehouse in Tver.
Characteristics:
Reel ID 800-2200 mm
Reel width 150-500 mm
Reel OD 3200 mm
Location: Warehouse Tver. All goods can be delivered in any country.

Manufacturer: Lunardon
Country of origin: Italy
Year of manufacture: 0
Description: The machine is almost new, it was only used for a couple of days.
Characteristics:
Drum ID 400 mm
Shaft diameter 80 mm
Drum width 530 mm
Drum OD 800 mm
The machine is supplied with a single plastic sleeve.
It is also possible to purchase additional new ones or make wooden ones
Location: machine is located in Italy. All goods can be delivered in any country.

Manufacturer: Krauss Maffei (Sica)
Country of origin: Italy
Model: KMBA/1T/PP160
Year of manufacture: 2002
Description: Automatic belling machine for PP pipes with a maximum size up to 160 mm.
Machine is supplied with a tool for the size of 50 mm.
Condition: Requires a small recondition.
Location: Warehouse Tver. All goods can be delivered in any country.

Description: rigid metal silos for storage powders materials.
Characteristics: volume 18 cubes, diameter 2650 mm, total height 6100 mm.
Available 2 pcs

Manufacturer: Bausano
Country of origin: Italy
Model: MD2-115
Year of manufacture: 2000
Description: double parallel screw extruder for PVC, max output 500 kg/h.
The extruder is supplied with new screws.
Screw diametr 115 mm, L/D 20
Location: Warehouse in Italy. All goods can be delivered in any country.